![verbatim store n go usb flash drive 2gb schematic verbatim store n go usb flash drive 2gb schematic](https://i.ebayimg.com/images/g/5g8AAOSw96leQzKa/s-l600.jpg)
Blue blink/red blink = Drive has been inserted into a USB port while locked. Blue flicker = Drive is unlocked, inserted into a powered USB port and data transfer is occurring BLUE LED/RED LED 1. Blue constant = Drive is unlocked and inserted into a powered USB port 2. Red/green alternating blink = A PIN entry error has been made retry PIN entry BLUE LED 1. Red/green double blink = Accepting Master PIN input 4. Red/green single blink = Accepting User PIN input 3. Red/green constant = Change of PIN initiated 2. Green double blink = Drive unlocked in Master Mode while powered by battery RED LED/GREEN LED 1. Green single blink = Drive is unlocked in User Mode while powered by battery 3. Green constant = Drive is connected to USB port and unlocked 2. NOTE: In the event a User PIN is set first, a Master PIN may still be set but requires the drive first be unlocked with the User PIN. Once the User PIN has been set the drive is locked and will require entry of the correct PIN to unlock it. It is necessary to set a User PIN in order for the User to begin using the drive. Once a Master PIN is set, it may be given to the User for setting the User PIN. I using a Master and User PIN, it is recommended (but not required) thatĢ the Master PIN be set first. The University does not usually deploy the LOK-IT drives with a Master PIN set. LOK-IT can be utilized without the Master PIN functionality. Operating Your LOK-IT Secure Flash Drive with Master and User PINS The drive is shipped disabled (Factory Default State) and will remain disabled until a PIN is set.
#Verbatim store n go usb flash drive 2gb schematic iso
Contact the ISO or your Department s ISA for assitance. If an executive user forgets their PIN, OIT may have set a master PIN to recover data if the device has not had 10 failed attempts. The drive is NOT intended for primary storage. It is the user s responsibility to remember their PIN. To prevent hacking and data loss, after 10 consecutive failed attempts to enter a PIN, the drive is wiped and all data will be lost. The drive contains a rechargable battery that is charged when inserted into a USB port. The LOK-IT USB drives will autolock when the drive is disconnected from the attached computer, or when it losses power. PINS must be be between 7 and 15 digits and cannot contain repeating numbers (, etc.) nor sequential numbers (, etc). An Administrative Master PIN can be set to recover a user s data if the user forgets their PIN. The USB functions equally well on Windows, Mac, Linux, as well as other systems.
![verbatim store n go usb flash drive 2gb schematic verbatim store n go usb flash drive 2gb schematic](https://www.barkerphotographic.ie/image/cache/catalog/98698%20Packaging%20Flat-1-800x800.png)
Loss or theft of these devices should be reported to the Information Security Office at or Features LOK-IT USB drives is an encrypted drive that is protected by a 7 to 15 digit key entered on the USB s keypad. The LOK-IT drives are the property of the University of Texas at Arlington. They are not intended to be used for primary data storage. 1 LOK-IT ENCRYPTED USB Administrator User Instructions LOK-IT USB Drives are supplied by the University to safely allow a method to transport data.